VIVOSUN AeroWave E6 6" Clip-On Oscillating Grow Tent Fan with EC Motor, Smart Control & Natural Wind Mode

What is the VIVOSUN AeroWave E6 fan used for in a grow tent?

This fan improves airflow through the canopy to prevent hotspots, strengthen stems, reduce humidity pockets, and support healthier plants. It's also helpful during drying and can replace multiple low-quality clip fans thanks to its coverage and reliability.

How much airflow does the VIVOSUN AeroWave E6 move, and is it quiet?

It pushes up to 320 CFM and runs at around 33 dB(A), making it quieter than most clip fans. Noise may vary at different speeds, but mounting it securely and avoiding vibration points helps keep it discreet.

Does the VIVOSUN AeroWave E6 oscillate, and what is natural wind mode?

Yes, it features 90° horizontal oscillation with 5 adjustable sweep ranges. Natural wind mode varies airflow to mimic a breeze, which helps avoid wind burn and is gentler for seedlings or sensitive plants.

Can I use the AeroWave E6 without a controller?

Yes, it works standalone with access to speed settings, oscillation, and local timer functions. Smart features unlock when paired with a compatible GrowHub controller.

Which controllers work with the VIVOSUN AeroWave E6?

It’s compatible with VIVOSUN GrowHub E42, E42A, and E25. When connected, you can control speed, oscillation, wind modes, and automate schedules via the app. A GrowHub cable is included.

What timer functions does the AeroWave E6 support?

It includes local cycle timers (e.g. 55/5, 45/15, 30/30 min) for intermittent airflow. You can also use GrowHub for scheduling or a basic wall timer, though smart features won’t function with external timers.

Will the VIVOSUN AeroWave E6 clamp fit my tent setup?

The clamp fits poles from 0.5" to 1" thick, including round and square types, plus some flat surfaces. It includes rubber padding to protect poles and prevent slipping. It also works in open grow rooms.

Is the VIVOSUN AeroWave E6 safe for 24/7 use in humid environments?

Yes. It’s IP54 rated, meaning it resists dust and moisture — ideal for grow tents. It’s built with an EC motor for long runtimes and includes obstacle detection to avoid jams during oscillation.

How do I clean the VIVOSUN AeroWave E6?

Unplug it, remove the front cover, and gently wipe the blades and grille. Avoid spraying water directly into the motor. Clean every few weeks in dusty setups or when airflow weakens.

What should I check if oscillation stops or airflow seems off?

Look for obstructions like cords or leaves, ensure proper clamp placement, and adjust the oscillation range for tight spaces. Aim airflow to gently move leaves—don’t blast one spot nonstop.

What’s included with the VIVOSUN AeroWave E6?

You get the fan, clamp mount, and smart control cable. The fan has a 6” blade, 320 CFM rating, 12W EC motor, 10-speed settings, auto oscillation, natural wind mode, and local timer options.

Can the AeroWave E6 remember settings after a power outage?

It depends on how it's controlled. With GrowHub, schedules and modes are usually retained. Without smart control, local settings may reset if power is interrupted.