What is The Seed Starter bundle and what’s included?
The Seed Starter bundle is a complete propagation setup that includes a Cultiv8 heat mat (550mm x 280mm, 25W), a thermostat controller, and two full humidity dome kits (each with a solid tray, grated tray, and clear lid). It does not include seeds or growing medium.
What is The Seed Starter bundle best used for?
It's ideal for seed germination, seedling raising, and even rooting cuttings. It helps maintain stable warmth and humidity—perfect for beginners or anyone growing in cooler conditions. Use it indoors or in a greenhouse with temperature monitoring.
How does the heat mat in The Seed Starter bundle work?
The Cultiv8 heat mat provides gentle bottom heat to raise root-zone temperature by 5–11°C above room temperature. This encourages faster germination and stronger root development. It’s compact, efficient, and uses only 25W of power.
What does the thermostat do, and how do I use it properly?
The thermostat cycles the mat on/off to hold your target temp (20–42°C) and supports both °C and °F. It can be calibrated and used with other compatible heaters up to 1000W. Always keep the controller dry and elevated from moisture.
Where should I place the thermostat probe for best results?
Insert the probe into the growing medium at root depth—not on the mat or in the air. This ensures accurate temperature control. Set a temperature based on your seed type, typically in the low–mid 20s°C for most vegetables.
Is The Seed Starter bundle good for all types of seeds?
Yes—it’s excellent for heat-loving seeds like tomatoes, chillies, and peppers. For cool-season crops like lettuce, use a lower setpoint or skip bottom heat. If you need two different temps at once, a second setup may be required.
When should I turn off the heat mat, and do I need grow lights?
Turn off or reduce heat once most seeds sprout. Seedlings don’t need as much bottom heat and may stretch without strong light. Indoor growers usually need supplemental lighting to prevent leggy growth after germination.
How do the trays and clear lid work in The Seed Starter bundle?
The solid tray holds water for bottom watering, while the grated tray allows drainage and airflow. The clear lid keeps humidity in during germination. Start venting or removing the lid once sprouts appear to avoid mould and weak growth.
How do I manage humidity and avoid mould?
High humidity is helpful early, but remove the lid gradually after germination. Avoid overwatering and improve airflow with a small fan if needed. If you see constant condensation or mould, vent more often and check moisture levels.
What growing media and tray types can I use?
You can use seedling cells, small pots, soil blocks, coco plugs, or propagation cubes. The trays support most formats. The number of seedlings depends on your tray size, but the bundle includes two full setups for parallel runs.
Why aren't my seeds germinating, or why are they drying out?
Common issues include old seeds, incorrect temperature, overwatering, or poor probe placement. Bottom heat increases evaporation—monitor moisture daily and avoid letting the medium stay soaked or too dry.
Can I clean and reuse The Seed Starter bundle?
Yes—everything is reusable. Wash trays and lids with soapy water and rinse thoroughly. For disinfection, soak in a mild solution, rinse, and dry fully before storage. Coil cords gently and store out of heat and sun between seasons.
Is The Seed Starter bundle safe to use long-term?
Yes—it’s safe when used with the thermostat and in dry conditions. The mat can stay on 24/7. Insulate underneath in cold rooms. A timer is optional but not required. Keep water away from plugs and powerboards.
Is Click & Collect available, and what’s the simplest setup?
Yes—Click & Collect is usually ready within 24 hours, depending on store stock. For setup: sow seeds in filled trays, place on the heat mat, insert the probe into the medium, set your temperature, and monitor moisture and light.
