Flame Defender 6kg (suitable for 2x2m2)

What is Flame Defender 6kg and how does it work?

Flame Defender 6kg is a self-contained automatic fire extinguisher designed for enclosed spaces like grow tents. It activates when the internal sensor reaches 68°C (155°F), releasing ABC dry powder downward in a dome pattern—no wiring or power needed.

What types of fires does Flame Defender 6kg protect against?

It’s rated for Class A, B, and C fires—meaning it works on flammable solids, liquids, and electrical fires. While it may help suppress lithium battery fires, it’s not a guaranteed solution for battery thermal events.

Where and how should I install the Flame Defender 6kg?

Mount it vertically near the top of your tent or room, above the main fire risk zone (like lights or powerboards). Keep it clear of direct heat sources and ensure nothing blocks the spray area. Avoid installing where strong airflow could pull powder away.

What happens if Flame Defender 6kg discharges—will it damage gear or plants?

Yes—it releases a fine powder that can damage electronics, clog fans, and contaminate plants or filters. It’s highly effective at fire suppression but will leave a mess. Most growers assume a full cleanout and equipment check after discharge.

What should I do after Flame Defender 6kg activates?

Evacuate safely and ventilate the space. Wear protection during cleanup and vacuum with a HEPA filter. Wipe down surfaces, replace carbon filters if clogged, and inspect all electronics before reuse. Identify and fix the original fire cause before restarting gear.

Can Flame Defender 6kg go off by accident?

It’s unlikely under normal conditions, but poor placement (too close to hot lights or heaters) or extreme tent temps can trigger it. It activates at 68°C, so tents running abnormally hot should be cooled or reconfigured.

Does Flame Defender 6kg need servicing or maintenance?

Yes—treat it like a fire extinguisher. Check monthly that it’s securely mounted, undamaged, and the gauge (if fitted) is in the green. Have it professionally serviced or replaced if out of date, discharged, or showing signs of failure.

Where can I use Flame Defender 6kg, and is it enough on its own?

It’s ideal for grow tents, greenhouses, garages, and enclosed risk areas. While powerful, it should be part of a layered safety setup—add smoke alarms, proper wiring, and a handheld extinguisher. It’s not a full replacement for general fire protection.

Is Flame Defender 6kg worth having if I already use smoke alarms and safe wiring?

Yes—Flame Defender is your backup plan if you’re not there when something goes wrong. It can help contain a fire before it spreads. For growers with high-value setups, it’s a low-cost insurance layer that could save your space.